Barko Hydraulics 495B SD, Руководство по обслуживанию

Страница: 96 / 101

Operation and Maintenance Manual Last Updated - 08/31/2016
495B ML TM (S)
96
REMEDY PROBLEM CAUSE
Engine cranks but will not start or
starts hard.
Fuel tank empty.
Water in fuel or water frozen in
fuel lines. Water frozen in fuel
filter.
Debris or dirt in fuel.
Air filter element restricted with
dirt, snow, or water.
Check fuel level. Fill as
necessary.
Thaw and /or drain water from
fuel tank. Thaw ice in fuel lines
and drain. Install new fuel filter.
Drain and flush fuel system.
Change fuel filter.
Clean or replace filter elements.
Clean air intake pipe screen.
Low engine oil pressure. Low engine oil level.
Low viscosity - (using too light of
oil in summer.)
Check engine oil level. Fill to
correct level. Check for and
repair, any leaks.
Drain engine oil and fill with
heavier weight engine oil.
Engine overheats. Low coolant level.
Loose, worn, or broken fan belt.
Radiator plugged.
Air filter elements plugged.
Fill to correct level and check for
leaks.
Tighten or replace belt.
Clean and inspect radiator.
Clean or replace elements.
Engine will not start.
Low or discharged battery.
Recharge battery.
ENGINE
TROUBLE SHOOTING
Use this section only as a general guide to finding solutions for machine problems.
If the machine should malfunction, find the problem in the headings listed then refer to the possible causes and
remedies listed with the problem.
The list of problems, causes, and remedies will only give an indication of where a possible problem can be and what
repairs are needed.
More, or other, possible servicing may be needed beyond the recommendations in the list or a factory service man
may be required.