manualshive.com logo in svg

Barko Hydraulics 495B SD, Руководство по обслуживанию

Поделиться
Скачать
Barko Hydraulics 495B SD Скачать руководство пользователя страница 100

Operation and Maintenance Manual

Last Updated - 08/31/2016

495B ML TM (S)

100

Decals

 

Part No. 

Description/Location 

Qty.

Serial Number or 

Date of Change.

Replace any safety decals that are faded, torn,missing, illegible, or 

otherwise damaged.  

Do not reproduce any decals listed or shown here for application on 

any Barko machine.  The decals used on Barko equipment are de-

signed to meet strict specifications for adhesion, temperature, color, 

layout and durability.  Any unauthorized reproduction of these decals 

will void the machine warranty.

Contact your Barko dealer to order any kits you may need.

  

 

 

133-00708 INSTALL. DRAWING, subframe non-skid mat'l  

 

1

 

163-01115  INSTALL. DRAWING, platform non-skid mat'l 

 

1

 

539-00868 NON-SKID MATERIAL, 6" wide 

 

AR

 

539-00950 NON-SKID MATERIAL, 12" wide 

 

AR

    NOTE

This section of the manual is used for the decal kits appropriate for the 

295 ML.  Those kits are:

 

 

Truck Mount Auxiliary Kit (539-00940)

 

 

Base Kit (539-00775)

 

 

Cab Kit  2006 (539-01063)

 

 

Laminated Cab Sheet (539-01050)

If the decal kit information is missing from this section of your hard copy of 

this manual, contact your Barko dealer to obtain copies of the kits and insert 

them here.

If you are accessing this manual via Barko's Compact Disc (CD), the 

appropriate decal kits can be viewed under Decals on the Barko CD.  They 

are listed by kit name.

Decals to be ordered separately (not included in any kit):

Содержание 495B SD






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды