Barix Exstreamer 100 User Manual Version 07.07
Page
17
6.11
Reverting to factory defaults
Click on the DEFAULTS button to enter the defaults page
You will see the following screen:
Click on "Factory defaults" to revert all settings except
"Network configuration" to factory defaults.
While restarting the device the following screen appears
showing a number counting down:
Upon start up the following screen appears stating the
successful reverting to factory defaults:
Hard default settings
To revert all settings (including the network settings) to
factory defaults the Reset button has to be pressed for
about 5 seconds while the Barix Exstreamer is powered.
Important note
Use this method if connection to the Barix Exstreamer
cannot be established.
This can happen if you have set a Static IP address once,
switched off SonicIP and then forgotten the IP address.
The Hard default settings sets the IP Address to automatic
discovery (0.0.0.0) and enables SonicIP.
If this fails we recommend to download the Barix
Exstreamer Rescue Kit from www.barix.com. This Rescue
Kit reloads the entire firmware using the supplied serial
cable.
Unzip the Kit and read "readme1st.txt" for instructions.
6.12
Rebooting the device
Click on the REBOOT button to enter the reboot page.
You will see the following screen:
Click "Reboot the device" to restart the Barix Exstreamer.
While restarting the device the following screen appears
showing a number counting down:
Upon start up the following screen appears stating the
successful restart:
Содержание EXSTREAMER 100
Страница 2: ......
Страница 4: ...Barix Exstreamer 100 User Manual Version 07 07 Page 2 ...
Страница 6: ...Barix Exstreamer 100 User Manual Version 07 07 Page 4 ...
Страница 28: ...Barix Exstreamer 100 User Manual Version 07 07 Page 26 ...