BARIX EXSTREAMER 100, Руководство пользователя

Страница: 16 / 29

Barix Exstreamer 100 User Manual Version 07.07
Page 14
Configuration Auto Store
Stores the configuration automatically 30 sec after the last
change in the control interface. The stored parameters are
volume, mute, volume lock, balance, bass, treble, loudness
on/off, shuffle and repeat.
6.6 Playlist settings
These settings adjust the playlist properties.
Own Name
You can enter the name of the Barix Exstreamer here. This
name is displayed in the file info frame on the device status
page. This name will be returned when using the
DISCOVER command (see technical documentation) and
will be used for the SYNC function by other Barix
Exstreamers.
Shuffle
This action automatically shuffles the media files inside a
playlist and plays them randomly non stop.
Repeat
If "Off" then nothing is repeated. If "Song" is selected the
actual song is played non stop. If "Playlist" is selected the
actual playlist is repeated non stop.
Show Cover
If enabled a cover image of the selected playlist is shown on
the right side of the playlist. The name of the cover file has
to match the name of the playlist file but using a ".jpg"
extension and must be stored in the same directory as the
playlist itself.
Walk Through Playlists
If set to "Yes", then it will play the next playlist after the
last one finishes. With "Yes" all playlists will play back to
back automatically.
Info Update Delay
If set to zero, the info frame will not be updated. Else every
n second the file info will be updated.
Playlist Path Match String / Subst String
If the path of a song in a playlist starts with the match
string, it will be replaced with the subst string.
6.7 WLAN settings (Wireless LAN)
These settings adjust the Wireless LAN properties.
SSID (WLAN Name)
Every wireless network is identified by a given name. Here
you can enter the name of your wireless network that is
indicated by your wireless access point. If you don’t enter a
name, then the Barix Exstreamer will log onto the first
wireless network it finds.
WLAN Mode
To communicate with a wireless access point you must
leave this setting on infrastructure mode else to ad hoc
mode.
WEP Mode
This is to encrypt the data that is being wirelessly trans-
mitted to the wireless access point. Set WEP mode to On
for using encryption else set to Off. If you use encryption
make sure to enter a WEP key.
WEP Key
For 64 bit encryption choose a key with exactly five
alphanumerical or 10 hexadecimal characters. The selected
key has to be the same key as in your access point is
activated. For a 128 bit encryption exactly 13 alpha-
numerical or 26 hexadecimal characters are expected.
To work wireless unplug the network cable and power
cycle the Barix Exstreamer after applying these settings.