ANNUNCICOM 1000
Network intercom and PA component for commercial, industrial and security applications
Quick Install Guide Version 1.0
ANNUNCICOM
Страница 1: ...ANNUNCICOM 1000 Network intercom and PA component for commercial industrial and security applications Quick Install Guide Version 1 0 ANNUNCICOM ...
Страница 2: ... 232 serial port DSub9 male K ETH1 RJ45 for LAN 10 100 Half Full duplex L ETH2 RJ45 NOT supported M Power 1 24 48 VDC 2 3 power supply minus E Power center 24 48 VDC ring power supply minus Installation STEP 1 Plug a standard straight network cable not included into the network port K of the Annuncicom 1000 and the other end into your hub or switch You can also use a crossover network cable not in...
Страница 3: ...m 1000 will reboot with a Static IP address Please continue with section Next steps on last page Network configuration using supplied serial cable STEP 1 Open a Terminal program STEP 2 Go to the settings menu of the terminal program and adjust the following settings Baud rate 9600 bit sec 8 Data Bits no Parity 1 Stop Bit STEP 3 Unplug the power supply of the Annuncicom 1000 STEP 4 Connect the supp...
Страница 4: ...all requested values STEP 5 Type in 9 and hit enter to save the Network configuration Next steps STEP 1 Download the user manual from www barix com STEP 2 Read the manual to configure the functionality of the Annuncicom 1000 STEP 3 Check the section Updating the device STEP 4 Check out the Barix user forum on www barix com for additional information Support For support please contact your local de...
