8
10
Remove the drive unit and replace the drive unit with a new unit.
11
Mount the upper clamp to the main body with 2 hexagon head cap
screws M5x25.
Apply Permabond A1042
on screw threads.
12
Connect both connectors, see step 9.
Fasten the earthing cable to the DC motor, see step 8.
Mount the main housing – back cover, see step 5.
Mount the main housing – middle cover, see step 4.
Mount the tamper base, see step 3.
Mount the main housing – top cover, step 2.
13
Check functioning of new drive unit
