Set up the Lower Clamp,
before you do anything else.
Only then
, every tamp will be perfectly level
and safe.
Installation set-up with Mythos
Hey there!
For instruction videos check
www.puqpress.com/support
Cleaning during your shift
Coffee can stick to your tamper while
making coffees. Give it a quick wipe
with a dry towel or cloth and you’re
good to go again!
Handle
with 2
people!
Set-up
with 2
people!
1.
Slide the back of Puqpress M2 over the edge of
the table or bar where you want to use your set-up.
Connect the Puqpress cable inside in its socket.
2.
While lifting the Mythos to place on Puqpress
M2, guide the Mythos cable from top to bottom
through Puqpress.
3.
Choose 1 of 3 directions to guide both cables out. Press the
Puqpress cable in the cable-guide behind the clip. Position the
Mythos cable in the other cable-guide (without clip).
4.
Carefully slide the set-up back onto the bar or table and
make sure its standing level.
