background image

 

17 

 

8.  DISPOSAL 

 

 

In the event of disposal comply 
with the regulations in force in the 
country where this operation is 
carried out.

 

 

9.  GUARANTEE 

 

All new machines sold are covered by guarantee 
for the structure and the use of suitable materials 
on the following conditions: 
 
1) 

The guarantee is valid for a period of twelve 
(12) months. 

2) 

The manufacturer undertakes to repair or 
replace at his own discretion those parts or 
units that are found to be defective. 

3) 

The parts repaired or replaced are covered 
by the same guarantee as the original parts, 
hence with validity of twelve months after the 
parts have been fitted. 

4) 

The manufacturer reserves an appropriate 
time  to execute the work necessary and 
deliver the spare parts. 

5) 

All the transport expenses for the 
replacement parts covered by this guarantee 
are at the expense of the purchaser. 

6) 

Any repairs or operations carried out during 
the period of guarantee by unauthorised 
persons shall lead to forfeiture of the 
guarantee. 

7) 

During the period of guarantee the parts 

replaced become the property of the 
manufacturer. 

8) 

For components not manufactured by us the 
conditions of guarantee of the original 
suppliers are valid. Any claims will hence be 
transferred to the purchaser. 

9) 

This guarantee is valid solely for the original 
purchaser. Our liability expires: 

  a)  the moment the original owner transfers 

ownership of the machine 

b)  if modifications are made to the machine 
c)   if parts and devices not manufactured by 

us are added to the machine. 

10)  We do not undertake any liability for any 

damage caused to the floor by bad 
functioning or stopping of the float machine 
during the working phases. 

11)  The guarantee does not  cover damages 

deriving from excessive stress (e.g. 
continuing to operate the machine after 
ascertaining a fault),  improper use or 
maintenance, use of unsuitable working 
materials as well as failed observance of the 
instructions for use. The same is valid  for 
damage caused by normal wear. 

12)  For the engines, the conditions of guarantee 

of the original suppliers are valid. 

13)  The conditions of guarantee established are 

binding for all BARIKELL srl dealers. Any 
other agreements will be considered valid 
only if confirmed in writing by BARIKELL srl 

14)  The manpower and work required to replace  

defective parts are at the expense of the 
customer. 

 
 
NOTES 
 
………………………………………………………………………………………………………………………………

………………………………………………………………………………………………………………………………

………………………………………………………………………………………………………………………………

………………………………………………………………………………………………………………………………

………………………………………………………………………………………………………………………………

……………………………………………………………………………………………………………………………… 

………………………………………………………………………………………………………………………………

………………………………………………………………………………………………………………………………

………………………………………………………………………………………………………………………………

………………………………………………………………………………………………………………………………

 

Содержание MK8 90

































Отзывы: