Barford SM312, Руководство оператора

Страница: 23 / 52

23
MODEL SM312
9. Check the conveyor belts is running smoothly and in alignment.
10. On first use let the conveyor run for 10 minutes before loading the feeder.
11. Adjust engine revs with the hand throttle.
STOPPING PROCEDURE:
1. Let the conveyor belt run a few minutes to ensure there is no material left on the belt.
2. Reduce engine revs with throttle.
3. Check that all levers are in neutral positions
4. Push the red button on the control panel to stop the engine. Always remove key from
machine when not in use.
5. Check that all control panels are closed securely.
EMERGENCY STOPPING:
1. Only use emergency stops for emergencies.
2. When an emergency stop has been pressed, do not restart the engine until it is safe to
do so. Pressing an emergency stop will stop the engine and machine.
3. Be familiar with emergency stop locations. When emergency stops have been pressed
turn the Ignition key off.
4. The emergency stops will now have to be physically disengaged by pulling or twisting.
Only when the machine is fully switched off and safe should you try to fix the problem.
RESTART AFTER EMERGENCY START:
1. Check all emergency stops are released.
2. Ensure the problem is solved before starting the machine.
3. Restart machine in the normal procedure.
9) OPERATING THE DIESEL POWERED CONVEYOR CONTINUED