Humidify
OPERATING INSTRUCTION
OPERATING INSTRUCTION
Reset setting
●
●
After cleaning or replacing new filters, please press “Reset”icon, then filter icons will stop flashing, the machine starts to
record the filters using time.
If the filter icons are always flashing, it means the filters life time comes to the end, please clean or replace new filters.
Remark :”Reset” icon has refresh function,PM2.5 data can be refreshed after pressing the “ Reset” icon
on the product operating panel .
11
Filter
replacement
indicator
HEPA
Activated
carbon and photo
catalyst
filter
Fan speed setting
If machine is set as intelligent mode, the “fan speed” icon can't be adjusted.
●
Fan speed “high, medium, low” can be selected after pressing the “fan speed” icon on the product operating panel.P1
●
Sleep mode: pressing “fan speed” icon and hold on for 3 seconds, the sleep mode will be on, if pressing any icons,
the sleep mode will be cancelled.P2:
：
Remark: Sleep mode is night mode
,
fan speed and noise are very low
,
all indicators are not lighted
.
P1:speed adjustment diagram
P2:Sleep mode diagram
●
The number of PM2.5 particles, air quality status,and machine intelligently running status as below.
Intelligent setting
●
●
Air quality indicator will be lighted after pressing the “Intelligent” icon on the product operating panel , the machine will check
the air quality and control its working status automatically.
Odor sensor is built-in,PM2.5 function is optional( Attention: for standard configuration, please see your purchased machines)
●
PM2.5 sensor: it's to check the dust or particles and display it by data.The diagram as following:
12
User manual
Ecological · intelligent air purifier with humidifier
Humidify
Humidify
%
%
%
Humidify
%
Remarks 1:
Remarks 2:
the quantity of the air quality
indicator
means air quality level and its working status.
when
you
choose
"
intelligent
"
mode
,
the
device
will
take
3
minutes
to
warm
up
, "
function
"
icon
can
not
use
in
this
mode
.
Remarks 3:
when
air
humidity
is
above
80
%,
it
will
affect
the
sensitivity of
sensor
,
the
PM2
.
5
data
is
just
for
your
reference
.
Humidify
%
Humidify
%
Humidify
%
Humidify
%
P1
P2
P3
P4
P1
:
Best
P2
:
good
P3
:
Mild-to-moderate polluted
P4
:
worst
polluted
