Bardiani BBZK Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 96

Bardiani BBZK Скачать руководство пользователя страница 94

94

18 Recommendations

EN-IST-BBZK-0721

18 Recommendations

1.

Consultation of the "Instruction, Use and Maintenance Manual” is mandatory prior to the
installation, use and maintenance of the products of all Products. All the information, indications,
specifications, technical details provided herein are based on test data which the Manufacturer
Bardiani Valvole S.p.A. holds to be reliable nevertheless the above is not deemed to be assumed
as fully exhaustive inasmuch as not every possible use has been envisaged.

2.

All the illustrations and drawings provided are to be intended as indicative and therefore not
binding, the illustrations being for presentation purposes only.

3.

It is the Buyer's duty to assess the suitability of the products for the use he intends to make of the
same prior to placing the order as he/she will take the risks and accept liability in case of incorrect
choice and use of the Products.

4.

The Manufacturer strongly recommends the Buyer to contact their sales team and request any
information that might be needed in relation to the specifications and uses of the Products.

5.

The information provided in this manual refers to the standard products manufactured by Bardiani
Valvole S.p.A. and therefore cannot be assumed to apply to customized products as well.

6.

Bardiani Valvole S.p.A. reserves the right to amend and/or integrate and/or update the data and/
or information and/or technical details relative to Products at any time and without prior notice.
Please visit the website www.bardiani.com, where the latest updated of the "Instruction, Use and
Maintenance Manual" can be found".

7.

The content and validity of the warranty covering the Products of Bardiani Valvole S.p.A are dealt
with in the relevant section in the “Instruction, Use and Maintenance Manual” which constitutes
an integral part of the Products themselves.

8.

Bardiani Valvole S.p.A., shall not in any way be held liable for immaterial, indirect and consequential
damages, such as (by way of example only), damages or loss of business, contracts, opportunities,
time, production, profits, goodwill, image etc..

«
...
92
93
94
95
96
»

Содержание BBZK

































































































Отзывы:

Нет отзывов