14
Site~Rite Vision* Ultrasound System
Roll Stand Adjustments
Display Adjustment
3.3
Display Rotation
3.3.1
Display Tilt
3.3.2
The roll stand is designed to allow the user to rotate the display 160° in the horizontal plane, 80° to the right and 80° to the left.
To adjust the position of the display in the horizontal plane, turn the display to the desired position.
Note: Extending the rotation of the display more than 80° in either direction could result in the system tipping, causing injury and/or
damage to the system.
The display can be tilted by rotating the display on its vertical pivot. If the tilt is too tight or too loose, this can be adjusted.
Adjusting tilt movement:
• Loosen the display tilt by rotating the clamp lever counter-clockwise.
• Tighten the display tilt by rotating the clamp lever clockwise.
• Reposition the display tilt clamp lever by lifting up and rotating.
Figure 3.3 Display Tilt Clamp
