Barco XDX, Руководство по установке

Страница: 43 / 90

43 R5914481 /02 XDX
W2
U1
U2
V1
V2
W1
Δ
MONO
W2
U1
U2
V1
V2
W1
W2
U1
U2
V1
V2
W1
Y
Image 4–2 From left to right: Y configuration, Δ configuration and mono phase configuration
Required tools
• Nut driver 10 mm
• Torque wrench with 10 mm hexagon socket
How to switch configurations
1. Loosen the top nuts on all the Υ / Δ / mono configuration pins. (U1, U2, V1, V2, W1 and W2). Use a 10 mm
nut driver.
Image 4–3
2. Take off the four mounted links (A, B, C and D).
3. Mount the links as illustrated, depending on the configuration:
1.
Y configuratio n: Connect the upper pins with each other. Place two links between each pin (do not
remove them).
W2
U1
U2
V1
V2
W1
A B C D
Image 4–4 Y configuration
2. Δ configuration : Connect the upper pins with the bottom pins as illustrated. Place two links between
pin W2 and U1 (A and B).
Installation procedures