Barco X8, Руководство по установке

Страница: 8 / 96

1. Safety
1.1 Safety guidelines
Personal protection
W
ARNING
:
Ensure you understand and follow all the safety guidelines, safety instructions, warnings and
cautions mentioned in this manual.
W
ARNING
:
Be aware of suspended loads.
W
ARNING
:
Wear a hard hat to reduce the risk of personal injury.
W
ARNING
:
Be careful while working with heavy loads.
W
ARNING
:
Mind your fi ngers while working with heavy loads.
Installation personnel
This installation must be performed by authorized and quali fi ed technical personnel only.
Accredited safety of fi cers must ensure the safety of the site, construction, assembly, connection, use, dismantling, transport etc. of
such safety critical systems.
Notice on safety
This equipment is built in accordance with the requirements of the international safety standards IEC60950-1, EN60950-1,
UL60950-1 and CAN/CSA C22.2 No.60950-1, which are the safety standards of information technology equipment including
electrical business equipment. These safety standards impose important requirements on the use of safety critical components,
materials and insulation, in order to protect the user or operator against risk of electric shock and energy hazard and having access
to live parts. Safety standards also impose limits to the internal and external temperature rises, radiation levels, mechanical stability
and strength, enclosure construction and protection against the risk of
fi re. Simulated single fault condition testing ensures the
safety of the equipment to the user even when the equipment’s normal operation fails.
Caution
Installation should be performed only after you are thoroughly familiar with all of the proper safety checks and installation instructions.
To do otherwise increases the risk of hazards and injury to the user.
Assembly parts are designed for intended use only in conjunction with DCP-0X10 LED displays.
Do not modify and/or replicate any component. Barco uses speci fi c materials and manufacturing processes in order to achieve part
strength. Consult Barco for assistance with custom applications.
Always follow Barco installation instructions. Contact Barco if you should have any question regarding the safety of an application.
The manufacturer assumes no liability for incorrect, inadequate, irresponsible or unsafe assembly of systems. The system must
comply with the local safety regulations regarding environmental conditions, solidity
fi nal construction, etc…
Product care
Structural & mounting components should be kept dry, clean, lubricated (only if recommended), coated properly, and otherwise
maintained in a manner consistent with part design. Barco products must be used in a manner consistent with their design and
inspected on a routine basis for security, wear, deformation, corrosion and any other circumstances that may affect the load handling
capability of the part.
Barco recommends inspections at regular intervals for all installations and increasing in frequency for more critical installations. If
a part is found to have damage, which may cause a decrease in load capability, the part must be removed for service or replaced
immediately.
Under no circumstances are Barco parts repairable by anyone other than Barco.
4 R5905160 X8 RENTAL DISPLAY 25/02/2013