Barco VRWF-3200, Руководство по установке системы

Страница: 51 / 71

9. Getting started
There is also a full system shutdown procedure which should be followed in case of system maintenance
operations. Note that in that case the projectors and the servers are shut down.
How to shut down the projectors ?
1. On the master projector, go to
Start/All Programs/Projector/Projector Off
(image 9-6)
Both projectors are put off (slave is put off by the master).
Image 9-6
Note that the explanation above is only valid if the iCon Server settings are configured the right way. This is
by default the case i.e. Projector standby state is in the ON position.
9.3 Full system shutdown
What can be done ?
In case of a full system shutdown the projectors and the servers are shut down.
How to do a full system shutdown ?
1. On the master projector, go to
Start/All Programs/Projector/Full system shutdown
(image 9-7)
R5976989 BARCO VR WORKROOM 22/09/2006 45