Barco VRWF-3200, Руководство по установке системы

Страница: 52 / 71

9. Getting started
Image 9-7
Full system shutdown
9.4 source selection
Introduction
• The stereo right channel signal is connected to one of the data inputs (for example on the Layer1 RGB input)
• A composite video source is connected to one of the video inputs (for example the Layer2 composite video input)
The control of the desktop happens physically on the Master i.e. the keyboard and the mouse are connected
to the Master projector.
How to add the stereo source window to your desktop ?
1. Click on the
Start
button
The start menu is opened
2. Click on
My Sources
to open the menu (image 9-8)
3. Select the stereo source you want to add to the desktop. (image 9-9)
4. Position the mouse cursor in the area of the stereo source window and click the right mouse button
The window menu is displayed (image 9-10)
5. Click on
Mono/Stereo
to activate the stereo mode (image 9-11)
The
Mono/Stereo
option is now checked
Image 9-8
46 R5976989 BARCO VR WORKROOM 22/09/2006