![background image](http://html.mh-extra.com/html/barco/vision-708/vision-708_owners-manual_474390040.webp)
Service Mode
7-3
5975639 BARCOVISION 708 161198
Total Run Time
Highlight
'Total Run Time'
with the control disc and press
ENTER
to
display the amount of time the projector has played since its first start
up at the factory.
Note : all projectors leave the factory after a burn-in period of
approximately 100 hours.
Change password
This item is password protected.
Highlight
'Change Password'
with the control disc and press
ENTER
.
ENTER
gives the selected item.
EXIT
returns to the Service mode menu.
ADJUST
returns to the Operational mode.
Select with or
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
ENTER
will display the selected item.
EXIT
will return to the Path Selection main menu.
ADJUST
will return to the Operational mode.
The current password is displayed. The new password must
consist of 4 digits between 0 and 9. Push the control disc to the left
or to the right to select the digits to be changed. Use the numeric keys
to enter the new digits.
Press
ENTER
to save the new password. Before saving the new
password, a confirmation screen will be displayed.
Press
EXIT
to return to the Projector Set-up menu without saving the
new password.
When the displayed password is correct, press
ENTER
to save.
If not correct, press
EXIT
to cancel the saving.
Select with or
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
Use and to select,
and reprogram
with numeric keys.
<ENTER> to confirm
<EXIT> to return
PASSWORD
Enter new password :
0 0 0 0
Password will be
reprogrammed as xxxx
<ENTER> to confirm
<EXIT> to cancel
CHANGE PASSWORD
ENTER
saves the entered password.
EXIT
returns without saving.
Change Language
The 'Change Language' function offers the possibility to change the
language of the screen menus to :
- English
- Spanish
- French
- German
Highlight
'Change Language'
with the control disc and press
ENTER
.
Select with or
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
Select with or
then <ENTER>
<EXIT> to return.
LANGUAGE
ENGLISH
ESPAÑOL
FRANCAIS
DEUTSCH
ENTER
selects the Change language menu.
EXIT
returns to the Service menu.
Push the control disc up or down to select the desired language and
press
ENTER
to change the language.
Password only active if jumper on controller is in 'ON' position.