![background image](http://html.mh-extra.com/html/barco/vision-708/vision-708_owners-manual_474390012.webp)
Location and Function of Controls
2-3
5975639 BARCOVISION 708 161198
BARCO key
: no function in this projector.
ADJ.
: adjust key, to enter or exit the adjustment mode.
Address key
(recessed key), to enter the address of the
projector (between 0 and 9). Press the address key,
followed by pressing one digit button between 0 and 9.
STBY
: stand by button :
- to initiate remote power up operation
- to stop projection without main power off.
Pause
:to blank the image, press PAUSE. The image
disappears but full power is retained for immediate restart-
ing.
Digit buttons
: direct input selection.
Picture controls
: use these buttons to obtain the desired
level (see also 'Controlling') for each picture function.
1
2
3
4
TEXT
: when adjusting one of the image controls during a
meeting, the displayed bar scale can be removed by
pressing 'TEXT' key first. To re-display the bar scale on the
screen, press 'TEXT' key again. 'TEXT' key is only active
in operational mode. When 'TEXT' is off, no warning
message will be displayed.
FREEZ :
Press to freeze the projected image (only with built
in line doubler (option).
ENTER
: to start up the adjustment mode or to confirm an
adjustment or selection in the adjustment mode.
EXIT
: to leave the adjustment mode or to scroll upwards
when in the adjustment mode.
Control disc
: to make menu selections when in the
adjustment mode. Also allows to increment or decrement
an adjustment in the adjustment mode.
control disc up = up arrow in the menus
control disc down = down arrow in the menus
control disc to the right = arrow to the right on the menus
control disc to the left = arrow to the left on the menus
RC operating indication
: lights up when a button on the
remote control is pressed. (This is a visual indicator to
check the operation of the remote control)
5
6
7
9
8
10
11
12
13