Barco Vision 708 9002357, Руководство по установке, Страница: 24 / 33

Installation Adjustments
7-4 5976026A BARCOVISION 708 200499
Scheimpfug adjustment
The scheimpfug correction can be adjusted separately for the three
tubes within 3 ranges:
range 1 : 1.4 m (55") to 1.9 m (75"), optimum screen width 1.4 m
(55")
range 2 : 1.9 m (75") to 3.2 m (126"), optimum screen width 2.4 m
(94")
range 3 : 3.2 m (126") to 6 m (236"), optimum screen width 4 m
(157")
A correct scheimpfug setting gives the possibility to focus the lenses
for a sharp image in all screen areas.
To change the setting from one range to another, some mechanical
actions have to done.
range 1
min. SW : 1.40 m (55")
max. SW : 1.90 m (75")
range 2
min. SW : 1.90 m (75")
max. SW : 3.20 m (126")
range 3
min. SW : 3.20 m (126")
max. SW : 6.00 m (236")
1. Open the top cover (see Gaining access to controls)
2. Loosen the lens bolts (do not remove them), and slide the lens to
the front until the scheimflug ring can move freely (nutdriver 11 mm
or screwdriver).
3. Push the scheimpfug ring to its correct position (front view).
range 1 : to the right
range 2 : in the middle
range 3 : to the left
4. Push the lens back till it fits in the ring and secure the four bolts.
P
P
P
P
P
P
See installation instructions before
connecting to the supply
V NOM 120/230 Volt
I MAX 5/2.5 AMP
FREQ 60/50 Hz
OFF
ON
/HQVEROWV
*UHHQOHQV
/HQVEROWV
5HGOHQV
/HQVEROWV
%OXHOHQV
See installation instructions before
connecting to the supply
V NOM 120/230 Volt
I MAX 5/2.5 AMP
FREQ 60/50 Hz
OFF
ON
UDQJH
UDQJH
UDQJH
%OXH
UDQJH
UDQJH
UDQJH
*UHHQ
UDQJH
UDQJH
UDQJH
5HG
6FKHLPSIXJFRUUHFWLRQKDQGOH