Barco UST-Lens, Руководство по установке

Страница: 10 / 22

R5914435. /00 UST-Lens for G100 series 10
2.1 Adapting the lens for the projecting position
Required tools
Allen wrench with long shaft 2 mm
How to adapt
1. Place the lens on a table. Turn out the 6 screws (1). Use an Allen key with a long shaft so that you do not
damage the screw head. These screws will not be reused.
Note: Always use the correct tool (delivered with the kit) to avoid damage to the screw heads !
1
Image 2 – 1
1
Image 2 – 2
2. Slide the motor housing a few mm to the backside of the lens (2) to disengage focusing gear and motor
gear.
Mounting the lens