Barco ULC-30A, Инструкция по установке и эксплуатации, Страница: 7 / 52

1. Introduction
1. INTRODUCTION
Overview
• General information
• Identi fi cation details
• Notices
1.1 General information
User recommendations
The instructions contained in this manual are intended for both trained personnel and expert operators who are authorized to handle,
install and dismantle the machine. Information intended for expert operators is provided in the attached documents.
Users are not allowed to perform the operations speci fi ed in the attached documents, whereas expert operators are authorized to
perform all operations described in the manual.
Aim of the manual
This manual, written by the manufacturer, provides operating instructions and criteria for proper installation, operation and mainte-
nance of the machine (trade name speci
fi ed on the cover).
This manual is an integral part of the equipment and must be kept for future reference and made available to expert operators, for
the entire working life of the machine.
The information contained herein is originally supplied by the manufacturer in English but may be translated into other languages to
meet legal and or trade requirements. If the manual is lost or damaged or if it becomes unreadable, a copy may be obtained from
the manufacturer, by specifying the model and serial number of the equipment. If the machine is sold, the seller is required to pass
on this manual to the new owner.
1.2 Identi fi cation details
Overview
COOLTECH s.r.l.
Via Prampolini 30
Formigine ITALY
VER
QUANTITY [kg] 2.25
VOLTAGE ( ± 10%) [V]
PHASE
NO. OF WIRES
CURRENT [A]
FREQUENCY [Hz]
MODEL
COOLTECH ART.
BARCO PART NUMBER
SERIAL NUMBER
MANUFACT. DATE
REFRIGERANT TYPE R410A,
COOLING LIQUID
UNIT WEIGHT [kg]
DESIGN PRESS. [Bar]
MAX INLET WATER PRESS. [Bar]
MAX PRIMARY OUTLET WATER PRESS.[Bar]
MAX SEC. OUTLET WATER PRESS.[Bar]
INLET PRIMARY WATER TEMP.[
° C]
INLET SEC. WATER TEMP.[ ° C]
MAX CURR. RATING
OF OVERCURR. PROTECT. [A]
MIN. CIRCUIT AMPACITY [A]
COMPRESSOR
CONDENSER FAN MOTOR
MAIN PUMP MOTOR
DMD PUMP MOTOR (opt.)
MADE IN ITALY
A
B C
I H
D
E
F
G
S
V
W
T
U
K
J
L
M
N
O P Q
R
Image 1-1
A Manufacturer’s details M Pressures [bar] and temperatures [°C] of each circuit
B Machine model N RCM mark Australia
C Machine version O WEEE marking concerning disposal of electronic equipment
D
Article code Manufacturer
P
CE marking of conformity
E Article number Barco Q UL marking
F Serial number R Mains voltage and electrical data
G manufacturing date S Electrical protection data
R5905866 ULC-30A 31/01/2018 3