R5906125 /00
External Laser Cooler Module
12
Image 1-11
A
Portrait Mode with cooling tubes facing upward
B
Singular cooling module in portrait mode with cooling tubes down
C
Cooler modules in rack/rigging frame with cooling tubes down (not allowed for safety reasons).
•
Wall mounting
–
landscape mode
: When this option is chosen, the cooler must be fixed on the wall in
portrait mode or in landscape mode, while taking into account the installation requirements (e.g. the 15cm
space between surface and air inlets).
In landscape mode the cooler must be mounted with the cooling tubes to the left. The other position
(cooling tubes to the right) is not allowed due to technical limitations.
A
B
Image 1-12
A
Landscape Mode with cooling tubes to the left
B
Landscape Mode with cooling tubes to the right (not allowed due to technical limitations)
1.4 Connecting the projector to the external cooler
Required parts
•
Cooling tube (2 x 8 meters)
•
Data & power cable
How to access the hose connections on the projector
1.
Remove the back cover of the projector.
2.
Loosen the two screws holding the protective plate from the back cover (reference 1 Image 1-13).
