R5906125 /00
External Laser Cooler Module
11
Caution
: Only use the depicted mounting positions. For safety reasons, it
’
s not allowed to hang up the
rigging frame with the tubes facing downwards. For technical reasons, it
’
s also not allowed to hang up the
rigging frame with the tubes facing the right side.
Image 1-9: mounting options when hanging from a truss beam
•
Floor mounting
: When placing the cooler module on the ground, on a table, or on another similar flat
surface, make sure it is placed either facing upwards, or on its side (with the tubes going to the left). Never
place the cooler module with its air inlets touching the ground.
Image 1-10
•
Wall mounting
–
portrait mode
: When this option is chosen, the cooler must be fixed on the wall in
portrait mode or in landscape mode, while taking into account the installation requirements (e.g. the 15cm
space between surface and air inlets).
In portrait mode, it is advised to mount the cooler must be mounted with the cooling tubes upwards. The
other position (cooling tubes down) is only allowed if you can safely secure the cooler module from falling.
However, when mounted in the rigging frame or other rack it is not allowed to mount the cooler module with
the tubes facing downward because of safety reasons.
