Barco UDX 4K32, Руководство пользователя

Страница: 14 / 82

1. Safety
RA TH
sw
PD
HD
DIFFUSE
sw
RZ
sw
sw
PR
HD
REFLECTION
RESTRICTED
AREA
RESTRICTED
AREA
Image 1-3
RA Restricted Access location (enclosed projection area).
PR Projector.
TH Theater (observation area).
RZ Restriction Zone.
PD Projection Distance.
SW Separation Width. Must be minimum 1 meter.
For this type of setup 3 different HD shall be considered:
• HD as discussed in "High Brightness precautions: Hazard Distance (HD)", page 8 , relevant for intrabeam exposure.
• HD
re fl ection
: the distance that has to be kept restrictive related to the re fl ected light from the rear projection screen.
• HD
diffuse
: the relevant distance to be considered while observing the defuse surface of the rear projection screen.
As described in "High Brightness precautions: Hazard Distance (HD)", page 8 , it is mandatory to create a restricted zone within
the beam areas closer than any NOHD. In the enclosed projection area the combination of two restricted zones are relevant: The
restricted zone of the projected beam toward the screen; taking into account 1 meter Separation Width (SW) from the beam onward.
Combined with the restricted zone related to the rear re
fl ection from the screen (HD
re fl ection
); also taking into account a 1 meter lateral
separation.
The HD
re fl ection
distance equals 25% of the difference between the determined HD distance and the projection distance to the rear
projection screen. To determine the HD distance for the used lens and projector model see graphs in chapter "HD in function of
modifying optics", page 11.
HD
reflection
= 25% (HD – PD)
The light emitted from the screen within the observation shall never exceed the RG2 exposure limit, determined at 10 cm. The
HD
diffuse
can be neglected if the measured light at the screen surface is below 5000 cd/m² or 15000 LUX.
10 R5906112 UDX SERIES 24/05/2017