Barco TouchKit, Инструкция по установке и эксплуатации

Страница: 20 / 31

Chapter 2. Configuration Utility
20 Barco TouchScreen Controller
<Multiple Monitors>
Set the check box (Enable Multiple Monitors) to enable multiple
monitors mapping. Unchecking this box will disable multiple-
monitor configuration, and all of the touch panel controllers will
be mapped to the primary monitor.
Note
: When using multiple touch panels, the Enable Multiple
Monitors check box must be checked for every touch controller to
ensure flawless operation.
The highlighted area is the monitor mapped to the selected
controller.
If multiple monitors are enabled, the Display page changes as
follows (example shows 2 monitors):
To map multiple monitors:
1. Select the touch screen controller in the General Tab. The
name of the selected controller is displayed in the title of the
TouchKit application window.
2. In the Display tab page select the display head (layout is the
same as in "Display settings - Settings") where the MFCD