Barco SIM 7QP HB, Руководство пользователя

Страница: 60 / 206

7. Advanced
On the screen appears now a slider box
Image 7-9
8. Use ← or → , the numeric keys on the remote, or the keypad to change the Phase
7.3.3 Scaling
What can be done?
The scaling of the source image can be chosen from three presets. Depending on the setting, the source signal will be displayed in
a different size and will possibly be stretched in one way or another.
• None: the source image will be shown in native resolution of the source
• Best Fit: the source image will be scaled to the biggest possible size without being distorted (e.g. stretched in one direction)
• Full-screen: the source image will be scaled and stretched in order to fi ll the full native resolution of the projector. This can lead
to an distorted image (e.g. stretched in one direction or the other)
How to scale the image?
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select Scaling
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the desired way of scaling
Image 7-10
7.3.4 Time of Day (TOD)
CCD
Constant Contrast Dimming
ECR
Extended Contrast Ratio
What can be done ?
The projector can be set to display typical scenes by performing an optimal adjustment of the dimmer (CCD) and the lens diaphragm
(ECR).
Following presets can be selected via the hand held RACU interface :
• Day
• Dusk
• Night
The OSD allows to set a custom value for the Time of Day (TOD) : 10000 corresponds to maximum light output (Day)
In practice, if the TOD value is lowered starting from 10000 (100%) to 0 (0%), the following sequence will be followed:
56 R59770330 SIM 7QP SERIES 08/12/2014