Manual # 26-0208100-00 / Revision E
ScreenSHAPER – Video Mapping System 15
Contrast and Brightness Adjustments
The Contrast and Brightness controls allow the operator to adjust the overall contrast and brightness of the image if
the input is analog. The adjustment range is 75.0% to 125.0%. 100% is the default setting for both contrast and
brightness. Contrast and brightness adjustments are only available when using an analog video input.
RGB Color Balance Submenu
The RGB Color Balance menu item is used to display a submenu where color balance adjustments are performed.
This menu allows the operator to balance the colors on the RGB input source. Independent Contrast and Brightness
adjustments are provided for each color channel.
The adjustment range for Brightness and Contrast is -25.0% to +25.0% with 0.0% as the default value.
The Reset Color menu item resets all the fields in this sub menu to the default value (0.0%). To reset the color
balance controls, scroll to the Reset Color menu item and select the menu item with the SEL key.
Color balance adjustments are not available when using a DVI video input.
Reset Color
This menu selection resets the input parameters to the default settings.
RGB COLOR BALANCE
R CONTRAST 0.0%
R BRIGHTNESS 0.0%
G CONTRAST 0.0%
G BRIGHTNESS 0.0%
B CONTRAST 0.0%
B BRIGHTNESS 0.0%
RESET COLOR