Barco S3 series, Руководство пользователя

Страница: 36 / 538

3. General
3.5 Control overview
General
There are several ways to control Event Master Series Processors.
Settings and Diagnostics:
• Front Panel .
• Web interface running directly from an Event Master series processor.
Operational Set up and Programming:
• Event Master Toolset running on a Windows 7 PC or Apple Mac with OSX.
• EventMaster Controller EC-50 or EC-200 .
Remote recall and non-Barco device connectivity:
• External serial protocol connected devices like PreSetManager.
Not all of these do the same thing, below the immediate differences. Several of these all work at the same time, providing multiple
points of control.
Front Panel
The Event Master series processor front panel includes a power switch, a USB port and a dimmable display that works in conjunction
with the ADJUST knob and SEL and ESC buttons. Through the front panel menus you can perform basic system functions such
as factory reset, set network parameters and basic diagnostics. A front-panel USB port is provided for downloading and restoring
logo images and system con
fi gurations. Refer to the chapter "Front panel", page 42 for more information about the about the Event
Master Series processor front panel menus.
Web interface
Via the local network and a computer the user can access a web page server running on Event Master series processor. Basic
system functions similar to the ones available from the front panel menus are accessible through the web page server. Refer to the
chapter "Settings Menu", page 201 for more information about the Event Master Series Web interface.
Event Master Toolset (EMTS)
Event Master Toolset Software is an easy to use GUI running on a PC or MAC. It provides all the Event Master Series of product
with control and con
fi guration.
The software consists of several menus and tabs that enable you to con fi gure your system, setup the input sources and output
destinations, manage the dedicated multiviewer and create your presentation’s overall “look”.
In addition, since the con fi guration parameters and presets are stored on the Event Master processor unit, multiple instances of the
GUI can be run simultaneously on different computers expanding the control possibilities.
Refer to the chapter "EM GUI orientation", page 87 for more information about the GUI. Subsequently in this User’s Guide, the Event
Master Control Software will be referred as the EM GUI.
Event Master Controller
The Event Master Controllers are dedicated hardware consoles speci fi cally designed to support the Event Master Series Processors,
devices and systems created from several of them.
It runs from the same software as the Event Master ToolSet, but EC-200 on an industrial operating system with optimized hardware.
All of them includes tactile operation style with buttons and touch screen displays allowing for easy and direct control.
Rudimentary Preset recall protocol for a single Processor is the same as for earlier products like Encore TM and FSN Production
Switching system.
An API based on JSON ( JavaScript Object Notation ) is available for developers who need to create custom control programs and
interfaces.
32 R5905948 EVENT MASTER DEVICES 17/07/2017