NE80E/40E LPUF-20 Flexible Plug-in Card
Copyright ©2008 Huawei Technologies Co., Ltd. All Rights Reserved.
http://www.huawei.com/products/datacomm/
NE80E/40E LPUF-20 Flexible Plug-in Card
Overview
The NE80E/40E provides the flexible plug-in card to enhance networking flexibility and
provides low-cost and customized solutions as required. The flexible plug-in card feature is
provided by the motherboard (LPUF-20) and the Flexible plugged-in interface card (FPIC).
The LPUF-20 has two slots. Each slot can be inserted with one FPIC. The LPUF-20 supports
the intermixing of FPICs of various Ethernet interfaces. Users can flexibly choose the FPICs as
required and replace FPICs on the site instead of replacing the LPUF-20. Thus, the cost of
maintaining devices is decreased.
The LPUF-20 supports a maximum of 20G bps bandwidth. It has two types: LPUF-20-A and
LPUF-20-B. The LPUF-20-A supports richer software features, including L3VPN, MVPN, and
IPv6.
Appearance of LPUF-20-A/B
The LPUF-20 flexible plug-in card provides the function of Ethernet clock synchronization. The
clock quality and stratum can thus be guaranteed. In the IP-RAN solution, the IP network runs
as the bearer layer between Node-B and RNC. With the function of Ethernet clock
synchronization, the problem of clock transmission in the IP network can be solved efficiently.
Specifications
At present, the LPUF-20 supports the following FPIC types:
1-port 10GBase WAN/LAN-XFP FPIC
z
z
12-port 100/1000Base-SFP FPIC
1
