![background image](http://html1.mh-extra.com/html/barco/rls-w12/rls-w12_user-manual_4250748067.webp)
RLS W12 02/12/2014
59
11.Alignment
The image below is an example if 2 projectors are projecting at the same image.
1. Horizontally place two projectors and have the two projected images with an overlap area and use the focus/zoom
and lens shift functions with test grid pattern to set a proper overlap area for blending with a matched grid size.
2. Color matching 2 projectors on white is done with P7 (R.G.B.C.M.Y.W) adjust in projector toolset.
3. Brightness matching 2 projectors can be done with the lamp power(Refer to adjustment by dimming the projector with
higher lumen.
4. Use ScenergiX-> White level to set the blending size based on the overlap region size.
Use ScenergiX-> Black level position to adjust the start position of black level compensation.
Use ScenergiX-> Black level to raise the brightness of non-overlap zone such that the brightness of the overlap zone and
non-overlap zone are matched for black level.
Please note that the following
allowable
warp, blanking and ScenergiX combination
based on the
underlying chip specification
ScenergiX / 4 corner combination is available when black level is not adjusted.
Blend along corners is available when black level is not adjusted.
Black Level Black Level
Black Level
Keystone Rotation Pin/Barrel 4-corner blanking Top/Bottom or
Left/Right only Blend along corners Black Level
Keystone
X
X
X
X
X
X
X
Rotation
X
X
X
X
X
X
X
Pin/Barrel
X
X
X
X
X
X
X
4-corner
X
X
X
OK
OK
OK
X
blanking
X
X
X
OK
OK
OK
OK
Top/Bottom or
Left/Right only
X
X
X
OK
OK
OK
Blend along corners
X
X
X
OK
OK
X
X
X
X
X
OK
OK
X
ScenergiX
Sc
ene
rg
iX
White Level
White Level
Содержание RLS W12
Страница 1: ...RLS W12 User manual...
Страница 88: ......