27
Using the remote control
5
1
3
2
4
1
5
INPUT
ASPECT
RATIO
AUTO IMAGE
PAUSE
TEXT
MENU
SHARPN
PHASE
COLOR
TINT
ADDRESS
SWAP
PIP
1
3
4
6
7
2
5
1.
ON
This button is used to turn on the
projector.
2.
OFF
This button is used to turn off the
projector.
3.
1
2
3
4
5
These buttons on the remote control are
the hotkeys for different image source.
By factory default, these are:
1 = HDMI 1
2 = RGB D-15
3 = RGBHV/YUV2
4 = YUV1
5 = Composite Video
You can configure the input source that
corresponds to each button in the OSD
Menu. To do so:
When press
MENU
> CONTROL > Button 1~5;
use the
▼▲
buttons to choose from diffferent
sources of input. You can choose from: HDMI
1,HDMI 2,RGB D-15,YUV 1,RGBHV/YUV
2,Composite Video,S-Video and RGB-S.
For example, if you have configured
1
as
RGB D-15 in the OSD Menu, when you press
1
on the remote control, the projector will
display the image from RGB D-15.
4.
▼▲ ▲
▲
Use these buttons to make your
selection or configure, adjust
configuration or toggle between image
displays.
ENTER
Use this button to select items in the menu
or confirm the settings you have changed.
When press ENTER , You also recall
LENS ADJUST when menu is off.
5.
ASPECT RATIO
You can scroll through different aspect
ratios by pressing this button repeatedly.
For more information, refer to Chapter VI
(OSD Menu
Aspect Ratio).
6.
MENU
Press this button to show or hide the
OSD Menu.
Various image adjustment buttons
PAUSE
PAUSE
Use this button to halt projection
temporarily.
TEXT
TEXT
When TEXT is set to ON, the
user will be able to operate the
OSD Menu normally.
When TEXT is set to OFF, only
ON, OFF, 1~5, SWAP, PIP,
PAUSE will function normally;
pressing any other buttons will
not access the OSD Menu.
