RLM W14 08/20/2014
61
11.Alignment
11.17 Blanking
Top
Press
on the remote control to adjust the top blanking area on
the projected image
Bottom
Press
on the remote control to adjust the Bottom blanking area
on the projected image
Left
Press
on the remote control to adjust the Left blanking area on
the projected image
Right
Press
on the remote control to adjust the right blanking area
on the projected image
Reset
It will reset all the blanking functions to the default settings that is
without any blanking functions enabled.
Use left blanking
function to block
the additional
image on the
screen.
11.18 ScenergiX
The function of ScenergiX is applied in multiple projectors that are projecting at the same screen simultaneously to adjust the
uniformity of the images on the screen.
Status
Press
ENTER
to select
ON
or
OFF
. The function must be set to
ON
in order to enable the function of ScenergiX. If the function is
set to
OFF
, the function of ScenergiX is disabled.
White Level
white level is to set the line from one projector where the other projector last pixel ends. Press
to adjust the white
level of the Top. Bottom, Left, Right direction on the projected image.
As shown in the below drawing, the area D is the overlap area of the projected image 1 and the projected
image 2. The white level lines that is set where the other projector last pixels ends. Color adjustment for
matching the images is done with projector toolset with customs color space x and y or with input balance
on the OSD.
Black Level
The purpose of black level is in order to compensate the non overlap zones vs the over lap zone. It increase the black level
to the brightness level of the overlap black. It is to adjust the black level of the Top, Bottom, Left, Right direction on the
projected images.
It can be set to adjust the primary color of the projector. For instance, select ALL is to adjust the primary color of Red, Greed,
and Blue. Or it can be set to adjust the Red, Green and Blue independently.
The function combination of Black Level adjustment and 4 Corners is not available
The function combination of Black Level adjustment and blend along corners is not available.
Содержание RLM-W14
Страница 1: ...RLM W14 User manual...
Страница 88: ...RLM W14 08 20 2014 80 15 Projector Specifications 15 3 Dimension 504 8mm 631mm 277mm...
Страница 91: ......