Barco RLM-W14, Руководство пользователя, Страница: 19 / 91

RLM W14 08/20/2014
11
2.General
2.6 Installation process overview
Quick setup
The following steps describe briefly how to setup your RLM W14 projector in a table mount front projection. Note that each
step refers to a corresponding procedure, which is more detailed and illustrated.
1. Install the batteries of the remote control. See
page 12: 3.1 Remote control unit (RCU)
2. Place the projector on a solid table in front of the screen at the expected throw distance. Adjust the feet to ensure that
the projector is installed at right angles (horizontally and vertically) with the screen. See page 20: 3.4 Alignment of a
table mounted projector and page 34: 5.8 Adjusting the lens by horizontal and vertical lens shift
3. Connect the projector with the local power net. See
page 18: 3.3 Connecting the projector with the power net
4. Select and install an appropriate lens, which covers the throw ratio ( = screen size / projector screen distance). See
page
9: Positioning the projector
5. Switch ON the projector. See
page 18: 3.3 Connecting the projector with the power net
6. Connect your source to the appropriate input module. See
page 23: 4.3 Input and Communication
7. Zoom and shift the lens until the image is properly projected on the screen, Do this by using the “ZOOM” and “FOCUS”
key on the remote control unit or on the local keypad. If necessary, level the projector from side to side by turning the
adjustable feet in or out. See
page 17: Lens zoom .