24
RLM
W12
STEREO DVI Connection
DVI D
ual Link
L/R
Sync
signal
EM
ITTER L/R
sign
als
IR EMITTER
3D Glasses
Connect the STEREO DVI to a stereo 3D source – it is usually a computer with 3D Graphics
card, and 3D applications.
3D mode
There are few ways to go to the 3D mode
- OSD menu: Go to Main Menu “Input > Input Selection”, and select STEREO DVI
- Remote control: Press hot key “5” to go to STEREO DVI directly
- Network Webpage: Go to “Source/general” > “Source” and select STEREO DVI
- RS232 Commands : Use “ Input.sel = 9” to select STEREO DVI
2D mode
Please note that OSD menu is not available in 3D mode. The ways to switch back to 2D
mode are:
- Remote control: Press any of the input key 1-4 will switch back to 2D mode.
- Network Webpage: Go to “Source/general” > “Source” and select any other source that
are available.
- RS232 Commands: Use “ Input.sel = 1-8” to select any other source that are available.
Installing the projector