![background image](http://html1.mh-extra.com/html/barco/r9898170/r9898170_installation-manual_4245113011.webp)
BARCO 11
Projection Systems
Activating the polarizers
What has to be
done
The polarizers can be activated (bringing them in front of the lenses) via the menu or
via an RS232 communication link (see R909 manuals for details on RS232 communi-
cation)
Necessary Tools
none
Activating the
polarizers via the
menu
To activate the polar via the menu, follow the next procedure:
1
1
1
1
2
2
3
3
3
4
Push the ADJ key to enter the adjustment mode
Push
é
or
ê
to select SERVICE
Press ENTER to select
The service menu will be displayed
Push
é
or
ê
to select COMMON SETTINGS
Press ENTER to select
The COMMON SETTINGS menu will be displayed
Push
é
or
ê
to select OPTION 1
Press ENTER to shutdown the polarizers.
OPTION 1 is now ON
Step
Action
Menu
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
COMMON SETTINGS
menu 3
DYNAMIC ASTIGMATISM
GAMMA CORRECTIONS
CRT RUN IN CYCLE
CRT DRIVE MODE
MEMORYBANKS : ON
FLYBACK TURNOVER POINT
MENU POSITION : STANDARD
OPTION 1 :
OFF
ADJUSTMENT MODE
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
SERVICE MODE
menu 1
menu 2
Select a path from
below :
RANDOM ACCESS
INSTALLATION
SERVICE
source 1
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
VOLTAGE DIAGNOSTICS
PROJECTOR DIAGNOSTICS
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
COMMON SETTINGS
menu 4
DYNAMIC ASTIGMATISM
GAMMA CORRECTIONS
CRT RUN IN CYCLE
CRT DRIVE MODE
MEMORYBANKS : ON
FLYBACK TURNOVER POINT
MENU POSITION : STANDARD
OPTION 1 :
ON
Illustrations
To be continued on next page