BARCO 7
Daylight Display Systems
Personnel
This installation must be performed by authorized and qualified technical personnel only.
Accredited Safety Officers must ensure the safety of the site, construction, assembly, connection, use, dismantling, transport
..etc. of such safety critical systems.
Caution
Installation should be performed only after you are thoroughly familiar with all of the proper safety checks and installation
instructions. To do otherwise increases the risk of hazards and injury to the user.
Assembly parts are designed for intended use only in conjunction with BARCO Day Light Displays.
Do not modify and/or replicate any component. BARCO uses specific materials and manufacturing processes in order to
achieve part strength. Consult BARCO for assistance with custom applications.
Always follow BARCO Installation Instructions. Contact BARCO if you should have any question regarding the safety of an
application.
The manufacturer assumes no liability for incorrect, inadequate, irresponsible or unsafe assembly of systems.
Product Care
Structural & Mounting Components should be kept dry, clean, lubricated (only if recommended), coated properly, and otherwise
maintained in a manner consistent with part design. BARCO products must be used in a manner consistent with their design
and inspected on a routine basis for security, wear, deformation, corrosion and any other circumstances that may affect the
load handling capability of the part.
BARCO recommends inspections at regular intervals for all installations and increasing in frequency for more critical
installations. If a part is found to have damage, which may cause a decrease in load capability, the part must be removed for
service or replaced immediately.
Under no circumstances are BARCO parts repairable by anyone other than BARCO.
Safety Guide Lines
Safety guide lines
LOCKING MECHANISMS
SECURELY ENGAGED
ALL JOINING EDGES
MIND YOUR
FINGERS
HEAVY LOADS
HARD HAT
SUSPENDED LOADS
Содержание R9850010
Страница 4: ......
