Barco R9850010, Руководство по установке

Страница: 19 / 39

BARCO ——————————————————— 19 —————————— Daylight Display Systems
To be continued on next page.
Assembly Connection (Continued)
For safety reasons, it is not recommended to use any other parts than those specified.
Disconnecting
Bottom Side
To disconnect the bottom of an Assembly, follow the next procedure :
Connecting Top
to Bottom
Connecting two Assemblies Top to Bottom (Assembly 2-1 to Assembly 1-1), follow the
next procedure:
1
2
3
3
Undo and remove only the ‘Hammer Bolts’ in ‘Aluminum
Corners’ that secure the Bottom side frame.
Remove Bottom side frame from the Assembly Block.
Step Action Image
1
2
3
4
5
6
Example
3
Example
There is no left side to remove from Assembly 1-1 or 2-1.
From Assembly 2-1 removal of the bottom side is
necessary (as explained above).
Place the Assemblies against each other.
Put at least two calibers in the holes on the connection of
the two Assemblies to make sure that there isn’t any
displacement of the Assemblies. After fixture, they can be
removed and used to align other assemblies.
Attach the corners with the hammer bolts previously
removed to the bottom of Assembly 2-1 (which has its
bottom frame removed).
Ensure the two Assemblies are aligned correctly and then
secure firmly.
Step Action Image