Barco R9050100 Скачать руководство пользователя страница 13

Страница: 13 / 233

1. Safety

1.4

Important warnings concerning CLM

ight cases

Important warnings concerning stacking/transporting CLM rental

ight cases

•

Stack maximum two (2) CLM rental

ight cases high. Never higher.

•

Surface on which

ight case is standing must be level to ensure that the total load is evenly spread out among the four wheels.

The surface must also be able to support the load safely.

•

Before stacking or transporting

ight cases, check the wheels and their

xation screws for wear or defects.

•

Before stacking or transporting

ight cases, check that the four lock handles on each

ight case are in good working order and

locked securely.

•

When stacked, make sure the wheels of the upper

ight case are precisely positioned in the stacking dishes of the

ight case

below.

•

Stacked

ight cases may not be moved. Before stacking, the lower

ight case must already be in its

nal resting position before

placing the second upon it.

•

Never stack loaded

ight cases in a truck or other transport medium, unless each

ight case is rigidly strapped tight.

•

In the event of a wheel breaking,

ight cases must be rigidly strapped tight to prevent a stack collapsing.

•

Use an appropriate forklift to raise

ight cases and take the necessary precautions to avoid personnel injury.

R59770021 CLM R10+ 15/03/2010

Содержание R9050100










































































































































































































































Результаты поиска

Содержание R9050100

Отзывы:

Похожие инструкции для R9050100

Бренды по названию

Популярные бренды

Barco R9050100, Руководство пользователя

Результаты поиска

Содержание R9050100

Отзывы:

Похожие инструкции для R9050100

Бренды по названию

Популярные бренды