Barco R9004460, Руководство пользователя

Страница: 43 / 133

4. Getting Started
4.2 Terminology overview Rugged remote control
Overview
Image 4-2
Rugged remote control
No. Key name Description
1 STBY standby button, to start projector when the power switch is switched on and to switch off the
projector without switching off the power switch.
Attention : Switching to Standby. When the projector is running and you want to
go to standby, press the standby key for 2 seconds.
2 ADJ Adjust key, to enter or exit the menus. corresponds with the Menu key on the remote control.
Press ADJ once = entering the local menus of the rugged remote control.
Press ADJ twice = entering the menus of the projector.
3 EXIT
to leave the selected menu or item (go upwards to previous menu). Corresponds with the
BACK button on the RCU.
4 TEXT to des-activate or activate the on screen dialog boxes and menus.
5 ENTER
to confirm an adjustment or selection in the MENU.
6 * key allows to recall the stored Logo (not in PiP mode)
7
Function keys user programmable keys with functions for direct access.
8 TEXT on LED red LED to indicate the text status.
9 PAUSE LED yellow LED to indicate the pause status of the projector
10 Cursor keys Cursor Keys : to make menu selections or to access the menu bar.
11 PAUSE to stop projection for a short time, press ’PAUSE’. The image disappears but full power is
retained for immediate restarting.
R59770014 XLM HD30 07/07/2006 39