![background image](http://html1.mh-extra.com/html/barco/r9002250/r9002250_installation-manual_4226181020.webp)
AC power connection
6-1
5975718 BARCODATA 1209s 050698
6
AC POWER CONNECTION
AC Power (mains) cord connection
Use the supplied cord to connect your projector to the wall outlet. Plug
the female power connector into the male connector at the back of
the projector.
This projector may be connected to an IT-power system. The IT-
power system is a power distribution system having no direct
connection to earth. Instead, the exposed conductive parts of the
electrical installation are earthed.
Preparing your power cord
Mains lead (power cord) with CEE7 plug
As the colors of the wires in the mains lead of this apparatus may
not correspond with the colored markings identifying the terminals in
your plug, proceed as follows:
−
The yellow/green wire is ground and must be connected to the
terminal in the plug which is marked by the letter E or by the safety
earth symbol or colored yellow and green.
−
The blue wire is neutral and must be connected to the terminal
marked with the letter N or colored black.
−
The brown wire is the line and must be connected to the terminal
marked with the letter L or colored red.
The wires of the delivered mains lead (power cord) are colored in
accordance with the following code :
Yellow and Green :
Ground (Earth).
Blue
:
Neutral.
Brown
:
Live.
Power cord with an ANSI 73.11 plug
The wires of the delivered mains lead (power cord) are colored in
accordance with the following code :
Yellow and Green : Ground (Earth).
White
: Neutral.
Black
: Live.
5
6
2
8
7
5
6
,
1
,5
5(027(
5
(
0
2
7
(
,5
56287
56,1
V NOM
I MAX
FREQ
120/230 Volt
7/5Amp
50/60Hz