![background image](http://html1.mh-extra.com/html/barco/r9001450/r9001450_owners-manual_4219842021.webp)
4-9
Connections
5975119 BARCODATA 3300 TCR
P
LUS
121098
56,1
56287
&2003257
$8',2287
&75/
S
-
V
I
D
E
O
98 27900
V
ID
E
O
L
R
A
U
D
I
O
9
,'
(
2
6
9
,'
(
2
,1
3
8
7
O
n
O
n
R
-
Y
Y
B
-
Y
S
O
n
98 27930
&
2
0
3
2
1
(
1
7
9
,'
(
2
,1
3
8
7
R
G
B
H
/
C
V
O
n
5
*
%
/
(
9
(
/
6
<
1
&
,1
3
8
7
98 27920
56
FRQQHFWLRQ
Connecting a computer, e.g. IBM PC (or
compatible), Apple Macintosh to the RS 232 input
of the projector.
The projector has a RS232 port that allows it to communicate with a
computer.
Applications : remote control and data communications.
a) remote control :
- easy adjustment of projector via IBM PC (or compat-
ible) or MAC connection.
- allow storage of multiple projector configurations and
set ups.
- wide range of control possibilities.
- address range from 0 to 255.
b) data communications :
- sending data to the projector or copying the data from
the projector to a hard memory device.
Set up of the baud rate for communication with a
computer.
The communication speed between projector and computer, e.g.
PC or MAC, has 8 possible speeds. With DIP switches S2(1,2,3)
on the controller unit, it is possible to select the baud rate
(communication speed).
If the baud rate setting is different from the used communication
speed, call an authorised service technician to change the baud
rate setting.
Connecting a RCVDS 05 to the projector.
- Up to 20 inputs with the RCVDS 05 and 90 inputs when RCVDS's
are linked via the expansion module.
- Serial communication with the projector.
- Remote control buttons on the RCVDS to control the projector
(source selection and analog settings).
- The selected source number will be displayed on a 2 digit display
and the selected input module will be indicated with a LED on the
rear.
For more information about the use of the RCVDS 05, consult the
owner's manual, order number : R5975765.
Connecting a VS05 to the projector
The VS05 can switch up to 5 Composite Video sources, 3 Super
Video sources and 1 RGB analog or component video source to the
projector. In addition, the audio signal proper to the source, can be
switched to an audio amplifier.
Order number : R9827890
For more information about the use of the VS05, consult the VS05
owner's manual, BARCO order number : R5975245.