![background image](http://html1.mh-extra.com/html/barco/r9001190/r9001190_owners-manual_4217399041.webp)
9-4
Service Mode
5975398 BARCODATA 3200 110797
Select with or
then <ENTER>
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
Reset Lamp Runtime
Reset lamp run time is only allowed when a new lamp is installed.
Highlight Reset Lamp Run Time by pushing the control disk up or up
and press
ENTER
to select.
When Reset Lamp Run Time is selected in the Service Mode selection
menu, the following warning will be displayed :
Risk of electrical shock. Reset lamp run time is reserved to qualified
service personnel.
If you are not qualified, press
EXIT
to cancel the reset operation.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP DRIVE MODE
MORE
WARNING
-----------------------------------------------------
RISK OF
ELECTRICAL SHOCK
______________________________________________________________
RESET LAMP RUN TIME
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
Lamp Run Time History
To get an overview of the different lamp run times, highlight Lamp Run
Time History by pushing the control disk up or up and press
ENTER
.
A listing with the lamp serial number and the corresponding run time
will be displayed.
The actual installed lamp will be marked.
Press
EXIT
to return to the service mode selection menu.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP DRIVE MODE
MORE...
LAMP RUNTIME HISTORY
Serial No
Runtime
-----------------------------------------------------
>
0111121
600 h
0110031
750 h
0110010
745 h
-----------------------------------------------------
<EXIT> to return
Lamp Drive Mode
Highlight Lamp Drive Mode by pushing the control disk up or up and
press
ENTER
to toggle between [NORMAL] and [TEMPORARY
BOOST].
[NORMAL] : lamp is driven with a power of 575W.
[TEMPORARY BOOST] : lamp is driven with a power of 700W
When switching off, the lamp drive mode will be set to 'NORMAL'.
The projector always starts in the normal drive mode.
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP DRIVE MODE
MORE...