![background image](http://html1.mh-extra.com/html/barco/r9001190/r9001190_owners-manual_4217399039.webp)
9-2
Service Mode
5975398 BARCODATA 3200 110797
PANEL ADJUSTMENT
RED COARSE
FIELD FLICKER
BLACK LEVEL TOP
BLACK LEVEL BOTTOM
GAIN TOP
GAIN BOTTOM
Change color+pattern
with or
Select with or
then <ENTER>
<EXIT> to return.
PRESET INPUT BALANCE
WHITE BALANCE
Select with <ENTER>
<EXIT> to return
Adjust
red with or
blue with or
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP DRIVE MODE
MORE...
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
PANEL ADJUSTMENTS
PRESET INPUT BALANCE
I2C DIAGNOSIS
MORE...
Select with or
then <ENTER>
<EXIT> to return.
I2C DIAGNOSIS
D CA
LCD DRIVER
SC76013 E6H # # #
LCD DRIVER
SC76013 E8H # # #
LCD DRIVER
SC76013 EAH # # #
LCD DRIVER
TDA8444 48H # # #
INPUT SELECTORPCF8574A 46H # # #
INPUT SELECTOR PCF8574A7EH # # #
DECODER
PCF8574 4EH # # #
DECODER
SAA7151B 8AH # # #
DECODER
SAA7152 B2H # # #
DECODER
SAA7192A E0H # # #
LAMP DRIVER
PCF8574A 72H # # #
AUDIO
TEA6310V 80H # # #
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP DRIVE MODE
MORE...
Identification
To display the Identification screen, push the control disk up or up to
highlight
Identification
and press
ENTER
to display the
Identification
screen.
The Identification screen gives an overview of :
- type of projector
- projector address
- software version
- installation configuration
- baud rate
- text ON
- projector serial number
- projector run time
-
software version
-
Proj. Address
: to change the address of the projector, see Change
Projector Address in this chapter.
-
Installation
: possible installations :
* Front/Ceiling
* Front/Table
* Rear/Ceiling
* Rear/Table
To change the installation configuration follow the instructions in
chapter Installation Set Up.
-
Baud rate
: transfer speed for communication with a IBM PC (or
compatible) or MAC. The baud rate of the projector must be the same
as the baud rate of the connected computer. When there is a
difference, consult 'Change Baudrate PC' in this chapter.
-
Projector Run Time
: gives the total run time since the first start up.
All projectors leave the factory with a run time of approximately 24
hours.
-
Projector Serial number
: indicates the fabrication number of the
projector. This number can be useful when calling for technical
assistance.
-
type
of projector : BARCODATA 3200