![background image](http://html1.mh-extra.com/html/barco/r817211k/r817211k_installation-manual_3999699009.webp)
BARCO 9
Projection Systems
Disassembling the LCD + X-CUBE Assembly
What has to be
done
The LCD + X-Cube assembly has to be disassembled.
Necessary Tools
Screwdriver 8 mm.
Nutdriver 5.5
Philips screwdriver
Electrical
disconnection of
the X-Cube.
Before disassembling the X-Cube assembly, it must be electrically disconnected from
the adjustment board. Follow the next procedure:
1
2
Press very carefully on both sides of the
indicated points to unlock.
Pull out the cable (see image 1).
Step
Action
Illustration
Press to lock
Press to unlock
Connector
connector
cable
Necessary Parts
None
Tip
While removing the screws and the parts, put them on a row to find them back the
correct assembling order.
To be continued on next page.
Illustration