![background image](http://html1.mh-extra.com/html/barco/r817211k/r817211k_installation-manual_3999699008.webp)
BARCO 8
Projection Systems
Removing the LCD + X-CUBE Assembly
What has to be
done
The LCD + X-Cube assembly has to be removed out of the projector.
Necessary Tools
Philips screwdriver
Electrical
disconnection of
the X-Cube.
Before removing the X-Cube, it must be electrically disconnected from the driver board.
Follow the next procedure:
1
2
Press very carefully on both sides of the
indicated points to unlock.
Pull out the cable.
Step
Action
Illustration
Press to lock
Press to unlock
Connector
connector
cable
Necessary Parts
None
Removing the X-
Cube Adjustment
Unit
To remove the LCD + X-cube unit together with the adjustment unit, follow the next
procedure:
1
2
3
1
1
Unplug the power cable.
Loosen both fixing screws down under by inserting Philips
screwdriver with a shaft of minimum 150 mm.
Slide out the assembly very carefully.
Step
Action
Image
Illustration
Cable connectors
Power cable