Barco PH series, Руководство пользователя и инструкция по установке

Страница: 83 / 143

7. Initial network settings
0. 0. 0. 0 SUBNET MASK
Image 7-14
3. Press the ENTER key.
SUBNET MASK screen appears.
255 . 255 . 255 . 0
0
OK
CLEAR
DEL
CANCEL
1 2 3 4 5 6 7 8 9
← →
SUBNET MASK
Image 7-15
4. Enter the Subnet Mask.
Refer to IP Address Settings for the detail of entering.
5. When selecting OK , the setting is completed as the Subnet Mask stored temporarily. However, when selecting CANCEL , the
setting is completed without storing.
→ When the setting you entered is correct, the IP CONFIG menu is displayed. If the entered content is not correct, the IP CONFIG
menu is displayed after an error dialog is displayed.
→ Until the execution of SAVE SETTINGS, the change is not saved.
7.4.5 Default Gateway Settings
Default Gateway
A server (or router) to communicate across networks (subnets) that are divided by Subnet Mask.
How to set
1. Display the IP CONFIG menu.
2. Press the ▲ or ▼ key to select DEFAULT GATEWAY .
0. 0. 0. 0 DEFAULT GATEWAY
Image 7-16
3. Press the ENTER key.
DEFAULT GATEWAY screen appears.
10 . 132 . 1 . 1
0
OK
CLEAR
DEL
CANCEL
1 2 3 4 5 6 7 8 9
← →
DEFAULT GATEWAY
Image 7-17
4. Enter the Default Gateway.
Refer to IP Address Settings for the detail of entering.
5. When selecting OK , the setting is completed as the Default Gateway stored temporarily. However, when selecting CANCEL , the
setting is completed without storing.
→ When the setting you entered is correct, the IP CONFIG menu is displayed. If the entered content is not correct, the IP CONFIG
menu is displayed after an error dialog is displayed.
→ Until the execution of SAVE SETTINGS, the change is not saved.
7.4.6 Saving IP CONFIG Settings
How to save
1. Display the IP CONFIG menu.
2. Press the ▼ key to select SAVE SETTINGS .
SAVE SETTINGS
OK
Image 7-18
3. Press the ENTER key.
R5905597 PHXX SERIES 20/05/2014 79
Downloaded From projector-manual.com Barco Manuals