![background image](http://html1.mh-extra.com/html/barco/pgwx-62l-k/pgwx-62l-k_user-manual_4201231008.webp)
8
PGWX-62L/PGWU-62L/PGWX-62L-K/PGWU-62L-K - - 2015/03/06
1. Safety
Do not expose this projector to rain or moisture.
y
Do not immerse or expose this projector in water or other liquids.
y
Do not spill liquid of any kind on this projector.
y
Should any liquid or solid object fall into the cabinet, unplug the set and have it checked by qualified service
y
personnel before resuming operations.
Do not disassemble this projector, always take it to an authorized trained service person when service or repair
y
work is required.
Do not use an accessory attachment which is not recommended by the manufacturer.
y
Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and
y
unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the device due to
lightning and AC power-line surges.
To prevent personal injury
To prevent injury and physical damage, always read this manual and all labels on the system before connecting
y
to the wall outlet or adjusting the projector.
To prevent injury, take note of the weight of the projector.
y
To prevent injury, ensure that the lens and all covers are correctly installed. See installation procedures.
y
Warning: high intensity light beam. NEVER look into the lens ! High luminance could result in damage to the
y
eye.
Warning: extremely high brightness laser: This projector uses extremely high brightness laser. Never attempt to
y
look directly into the lens or at the laser.
Before attempting to remove any of the projector’s covers, you must turn off the projector and disconnect from
y
the wall outlet.
When required to switch off the projector, to access parts inside, always disconnect the power cord from the
y
power net.
The power input at the projector side is considered as the disconnect device. When required to switch off the
y
projector, to access parts inside, always disconnect the power cord at the projector side. In case the power input
at the projector side is not accessible (e.g. ceiling mount), the socket outlet supplying the projector shall be
installed nearby the projector and be easily accessible, or a readily accessible general disconnect device shall
be incorporated in the fixed wiring.
Do not place this equipment on an unstable cart, stand, or table. The product may fall, causing serious damage
y
to it and possible injury to the user.
It is hazardous to operate without lens or shield. Lenses, shields or ultra violet screens shall be changed if they
y
have become visibly damaged to such an extent that their effectiveness is impaired. For example by cracks or
deep scratches.
Exposure to UV radiation: Some medications are known to make individuals extra sensitive to UV radiation. The
y
American Conference of Governmental Industrial Hygienists (ACGIH) recommends occupational UV exposure
for an-8 hour day to be less than 0,1 micro-watts per square centimeters of effective UV radiation. An evaluation
of the workplace is advised to assure employees are not exposed to cumulative radiation levels exceeding these
government guidelines. The exposer of this UV radiation is allowed for only 1 hour per day for maintenance and
service persons.
To prevent fire hazard
Do not place flammable or combustible materials near the projector!
y
Barco large screen projection products are designed and manufactured to meet the most stringent safety
y
regulations. This projector radiates heat on its external surfaces and from ventilation ducts during normal
operation, which is both normal and safe. Exposing flammable or combustible materials into close proximity
of this projector could result in the spontaneous ignition of that material, resulting in a fire. For this reason, it
is absolutely necessary to leave an “exclusion zone” around all external surfaces of the projector whereby no
flammable or combustible materials are present. The exclusion zone must be not less than 50 cm (20”) for all
DLP projectors. The exclusion zone on the lens side must be at least 5 m. Do not cover the projector or the lens
with any material while the projector is in operation. Keep flammable and combustible materials away from the
projector at all times. Mount the projector in a well-ventilated area away from sources of ignition and out of direct
sun light. Never expose the projector to rain or moisture. In the event of fire, use sand, CO2 or dry powder
fire extinguishers. Never use water on an electrical fire. Always have service performed on this projector by
authorized Barco service personnel. Always insist on genuine Barco replacement parts. Never use non-Barco