44
PGWX-62L/PGWU-62L/PGWX-62L-K/PGWU-62L-K - - 2015/03/06
6. Maintenance & Service
6.1 Replacing the Lens
6. MAINTENANCE & SERVICE
Overview
Replacing the Lens
y
Turn the projector off and unplug the power cord.
1.
1
Allow the projector to cool down for at least 1 minute then start the lens replacement.
2.
2
Remove the lens cover from the projector.
3.
3
Rotate the bar upwards and then rotate the lens counterclockwise to remove it from the projector.
4.
4
Replace the lens to be installed, be sure the label “
5.
TOP
” of lens is upward and then push the lens into the
position.
5
Rotate the lens clockwise to lock the lens and then rotate the bar downwards.
6.
6
Put the lens cover to the projector with the sound “click”.
7.
7
Procedure:
VGA-OUT
VGA-IN
LAN
RS-232
12V
OUT
5V
OUT
CVBS
HDMI
DVI
Enter
Menu
1
2
6
7
3
4
Warning: This procedure may only be performed by qualified technical service personnel.
Caution: Do not transport the projector with any lens installed.
Note: Please verify that all the plastic caps removed from the lens prior inserting in the projector.
5