PFWX-51B/PFWU-51B 10/02/2014
56
9.Settings 2
9.3 No Signal Power Off
Automatically shut off when no signal. (in minutes). If siwitch to
On
, the projector will automatically shut off after 15 minutes
when no signal.
9.4 Auto Power On
Automatically power on when AC power applied.
9.5 Lamp Mode
When the lamp is set to ECO mode, the lamp is running at 280W. If the ambient temperature is higher than 35 degree Celsius,
lamp will operate at ECO mode. In this case, lamp mode selection is unavailable. Lamp mode selection is available once the
ambient temperature drops below 35 degree Celsius.
• ECO
When set to Eco mode, the wattage of the lamp will be at 280W. If the surrounding environment is sufficiently dark or if
you do not require intense brightness, you can set the lamp to Eco mode to prolong its usage life.
• Normal
When set to Normal mode, the wattage of the lamp will be at 370W. If the projection environment requires brighter
image, you can set the lamp to Normal for the highest projection brightness.
• POWER
When set to Power mode, the wattage of lamp will be at 330W. you can set the lamp to Power mode to prolong its usage
life.
9.6 Reset All
All settings of the projector will be set to the original factory settings. All user settings are erased with this operation.
This function will not apply to items including no signal, network, Projector control, startup Logo, language,
High Altitute mode and lamp hours
When Factory Reset is executed, all source memories created by the projector (i.e. timings files) will be
erased
9.7 Status
Active Source
To show which source is activated
Video Information
Showing resolution/H, V information at RGB mode. Showing color standard at Video mode.
Lamp Hours (ECO, Normal, POWER)
Lamp hour used information. ECO, Normal and POWER counter are separated.
Software Version
Showing system software version.
Serial Number
Showing serial number of this projector.
