background image

Projector

CP-X807

User's Manual (detailed)  

Network Guide

Thank you for purchasing this projector.

This projector has the network function that brings you the following main features.

►Before using this product, be sure to read all manuals for this 

product. 

 

After reading them, store them in a safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in 

this manual.

• The reproduction, transfer or copy of all or any part of this document is not 

permitted without express written consent.

NOTE

Trademark acknowledgment

• Windows is a registered trademark of Microsoft Corporation.

• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks 

or registered trademarks of HDMI Licensing LLC.

All other trademarks are the properties of their respective owners.

ü

  

Live Mode 

This projector can project your PC images on screen through wireless or wired 

network, which can erase a signal cable from your desk.

ü

  

Quick connection to your network

 

No expert knowledge is required any more. Various options for network setting 

give you a quick and simple connection to the network.

ü

  

Web control 

The projector can be controlled and monitored by a web browser software on 

your PC, which can help you to setup and maintain the projector.

ü

  

PC-LESS Presentation 

This projector can project images stored in an SD memory or a USB memory 

on screen, which allow you not to bring your PC with you.

This manual is only intended to explain Network functions only.

For safety, operations or any other issues, refer to the Safety Guide and User’s 

Manual (concise and detailed).

Summary of Contents for X807 - CP XGA LCD Projector
























































































































Reviews: